Tubing Dies - Specifications

Specifications

Please contact KIWI® Wire Die sales to select the best suitable stone size for your specific requirement.

Tubing Die Specifications	Product name	Sink Die	Plug Tube Die
	Available sizes	0,010 to 100 mm, larger sizes are available on request
	Standard tolerance	Tolerance depends on hole diameter and nib type
	Standard available angles (1)	8 - 28°
	Standard angle tolerance (2)	± 2°
	Blank (nib) material	Tungsten Carbide (TC), Polycrystalline Diamond (PCD), Single Crystal Diamond (SSCD/ND)

1), 2) Other angles and tolerances are available on request

Standard product coding	Blank material	Engraving
	Polycrystalline Diamond (PCD)
	Synthetic Single Crystal Diamond (SSCD)
	Natural Single Crystal Diamond (ND)
	Tungsten carbide (TC)

Please contact KIWI® Wire Die for any special engraving requirements.

PCD/SSCD/ND Tubing Die Standard Tolerances	Metric tolerances [mm]			Metric tolerances [mm]
	Diameter	Tolerance	Max. ovality	Diameter	Tolerance	Max. ovality
	≤ 0.020	+0 / -1.5%xØ	1.5%xØ	2.001 - 3.500	+0 / -0.005	0.003
	0.021 - 0.025	+0 / -0.0003	0.0002	3.501 - 5.500	+0 / -0.006	0.0035
	0.030 - 0.050	+0 / -0.0004	0.0003	5.501 - 8.000	+0 / -0.007	0.004
	0.051 - 0.075	+0 / -0.0006	0.0004	8.001 - 10.00	+0 / -0.008	0.004
	0.076 - 0.100	+0 / -0.0008	0.0004	10.001 - 12.0	+0 / -0.010	0.005
	0.101 - 0.200	+0 / -0.001	0.001	12.001 - 15.0	+0 / -0.012	0.006
	0.201 - 0.500	+0 / -0.002	0.0015	15.001 - 18.0	+0 / -0.014	0.007
	0.501 - 1.000	+0 / -0.003	0.002	18.001 - 21.0	+0 / -0.016	0.008
	1.001 - 2.000	+0 / -0.004	0.0025	21.001 - 24.0	+0 / -0.018	0.009
	Continued ⇨			24.001 - 35.0	+0 / -0.020	0.010
TC Tubing Die Standard Tolerances	Metric tolerances [mm]
	Diameter		Tolerance
	≥ 0.800		+0 / -0.0150

Tighter tolerances are available when required.

Get Started

Call now to more about how KIWI® Wire Dies are used for tube drawing.

TUBING DIES

Message *

Message